MSDS Info

	PLEASE CALL 800-815-2941 TO ORDER
	Home Foggers \| Low Fog \| Hazers \| Fluid \| Misc FX

MSDS Information

Fog Factory Fluid

High End Systems

American DJ

Le Maitre

Fog Factory MSDS

==================================================
SECTION I - PRODUCT IDENTIFICATION
==================================================
Product Name: Fog Factory Fluid
Product Use: Theatrical Fog
WHMIS/OSHA Class: Not controlled
T.D.G./DOT Classification: Not regulated

Manufacturer/Supplier: Manufactured for: Towards 2000 Inc.
Address: 4114 Vanowen Pl.

Burbank CA, USA 91505

Telephone: 818-557-0903

Emergency Phone Number: CHEMTREC (800) 424-9300 ==================================================
SECTION II - INGREDIENTS
==================================================
Ingredients CAS# Wt% ACGIH-TLV LC50 LD50
Dipropylene glycol 25265-71-8 <25 Not available Not available 14800 mg/kg oral, rat
Triethylene glycol 112-27-6 <25 Not available Not available 17000 mg/kg oral, rat
Water 7732-18-5 >50 Not available Not available 14500 mg/kg oral, rat
. ==================================================
SECTION III - PHYSICAL DATA
==================================================
Boiling Point (deg C): Not available Specific Gravity (H2O = 1): ~1.037
Vapour Pressure (mmHg @ 20°C): Not available % Volatile (Wt %): Not available
Vapour Density (Air = 1): >1 Evaporation Rate (Water = 1): Not available
Solubility in Water: Complete pH: Neutral
Physical State: Liquid Viscosity: Not available
Appearance and Odour: Clear colourless, no odour Odour Threshold (ppm): Not available
==================================================
SECTION IV - FIRE AND EXPLOSION DATA
==================================================
Flammability: Not flammable by WHMIS/OSHA criteria.
Flash Point (deg C, TCC): >121 LEL: Not available UEL: Not available
Hazardous Combustion Products: May include and are not limited to oxides of carbon.
Autoignition Temperature (deg C): Not available.
Means of Extinction: Carbon dioxide, dry chemical, alcohol foam, water fog.
Special Fire Hazards: Firefighters should wear self-contained breathing apparatus.
==================================================
SECTION V - REACTIVITY DATA ==================================================
Conditions for Chemical Instability: Stable.
Incompatible Materials: Acids, oxidizers, bases.
Reactivity, and Under What Conditions: Not available
Hazardous Decomposition Products: May include and are not limited to oxides of carbon when heated to decomposition.

Fog Factory Fluid
==================================================
SECTION VI - TOXICOLOGICAL PROPERTIES
==================================================
Route of Entry: Eye, Ingestion

EFFECTS OF ACUTE EXPOSURE:
Eye: May cause irritation.
Ingestion: May cause stomach irritation.

EFFECTS OF CHRONIC EXPOSURE:
None known.

Irritancy: Non-hazardous.
Respiratory Tract Sensitization: No data available.
Carcinogenicity: Non-hazardous by WHMIS/OSHA criteria.
Teratogenicity, Reproductive Effects: No data available.
Mutagenicity: No data available.
Synergistic Materials: Not available.
==================================================
SECTION VII- PREVENTATIVE MEASURES
==================================================
Gloves: Rubber gloves recommended.
Eye Protection: Safety glasses recommended.
Respiratory Protection: Not normally required if good ventilation is maintained.
Other Protective Equipment: As required by employer code.
Engineering Controls: General ventilation normally adequate.
Leak and Spill Procedure: Before attempting clean-up, refer to hazard data given above. Small spills may be absorbed with non reactive absorbent and placed in suitable, covered, labelled containers. Prevent large spills from entering sewers or waterways. Contact emergency services and supplier for advice.
Waste Disposal: Review federal, provincial and local government requirements prior to disposal.
Storage and Handling Requirements: Keep out of reach of children. Store in closed container away from incompatible materials.
==================================================
SECTION VIII - FIRST AID
==================================================
Eye: Immediately flush with water. Remove contact lenses, if applicable, and continue flushing for 15 minutes. Obtain medical attention if irritation develops.
Skin: Not a normal route of harmful exposure. Flush with water. Wash thoroughly with soap and water. Obtain medical attention if irritation develops.
Inhalation: Not a normal route of harmful exposure. If symptoms develop, move victim to fresh air. If symptoms persist, obtain medical attention.
Ingestion: Do not induce vomiting. Rinse mouth with water, then drink one glass of water. Obtain medical attention. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness or is convulsing.
==================================================
SECTION IX - PREPARATION INFORMATION
==================================================
Date: 28 March 2002 MSDS Prepared by: Dell Tech Laboratories Ltd.
Telephone: (519) 858-5021
==================================================
Disclaimer
Information for this material safety data sheet was obtained from sources considered technically accurate and reliable. While every effort has been made to ensure full disclosure of product hazards, in some cases data is not available and is so stated. Since conditions of actual product use are beyond control of the supplier, it is assumed that users of this material have been fully trained according to the mandatory requirements of WHMIS. No warranty, expressed or implied, is made and supplier will not be liable for any losses, injuries or consequential damages which may result from the use of or reliance on any information contained in this form. If user requires independent information on ingredients in this or any other material, we recommend contact with the Canadian Centre for Occupational Health and Safety (CCOHS) in Hamilton, Ontario (1-800-263-8466) or CSST in Montreal, Quebec (514-873-3990)

MSDS - Atmospheres Fog Fluid
(High End Systems)

Material Safety Data Sheet

EFFECTIVE DATE: 07/01/95

High End Systems urges each customer or recipient of this MSDS to study it carefully to become aware of and understand the hazards associated with the product. The reader should consider consulting reference works or individuals who are experts in ventilation, toxicology, and fire prevention, as necessary or appropriate to use and understand the data contained in this MSDS.

To promote safe handling, each customer or recipient should: (1) notify it's employees, agents, contractors and others whom it knows or believes will use this material of the information in this MSDS and any other information regarding hazards or safety; (2) furnish this same information to each of it's customers for the products; and (3) request it's customers to notify their employees, customers, and other users of the product of this information.

I. IDENTIFICATION

PRODUCT NAME: "Atmospheres" HQ Light Enhancement Fluid ("Stage" and "Coldflow" formulas contain different percentages of the CAS#'s and a higher percentage of water)

FORMULA: Food grade or high purity grade propylene glycol, triethylene glycol and de-ionized water

II. PHYSICAL DATA

CAS# 57-55-6 and 112-27-6

BOILING POINT (760 mm Hg)

212-470° F

MELTING POINT

Not applicable

SPECIFIC GRAVITY (H20=1)

1.082 AT 20° C

VAPOR PRESSURE AT 20° C

<.025mm Hg

VAPOR DENSITY (air=1)

3.9

SOLUBILITY IN WATER

Complete @ 70° F

EVAPORATION RATE(Butyl Acetate=1)

.003

APPEARANCE AND ODOR

Water-white liquid; mild odor

III. INGREDIENTS

This product is a mixture of very low toxicity ingredients which are of high purity or food grade. According to OSHA this product is non-hazardous under (1910.1200). The largest single component of this product is de-ionized water.

IV. FIRE AND EXPLOSION HAZARD DATA

FLASH POINT

No flash point by Cleveland Open Cup and Penskey-Martin Closed Cup due to the fact that this is primarily a water based formula

AUTOIGNITION TEMP

Not Determined

FLAMMABLE LIMITS IN AIR % BY VOLUME

Not Determined

EXTINGUISHING MEDIA

Water spray or all purpose foams by manufacturers' recommended techniques for large fires. Use CO2 or dry chemical media for small fires.

UNUSUAL FIRE AND EXPLOSION HAZARDS

None

V. HEALTH HAZARD DATA

TLV AND SOURCE: Occupational exposure limits (PELs or TLVs) have not been established for any of the components of this product in the United States. In England, exposure limits for propylene glycol are: Vapor - 470mg/m3 8 hour time weighted average, Particulate - 10mg/m3 8 hour time weighted average.

EFFECTS OF SINGLE OVEREXPOSURE:

SWALLOWING: No evidence of adverse effect for low dose. May cause nausea and vomiting in higher dosage.

INHALATION: No evidence of adverse effects from exposure to recommended levels. Should continuous exposure to high concentrations of fog be required professionally (i.e. fire training), a canister type particle mask designed for 10 to 20 micron filtration should be used.

SKIN CONTACT: May cause minimal irritation of areas exposed to liquid.

EYE CONTACT: If splashed in eyes, may cause minimal irritation seen as slight excess redness of the conjunctiva.

EFFECTS OF REPEATED OVEREXPOSURE: No evidence of adverse effects from available information.

MEDICAL CONDITIONS AGGRAVATED BY OVEREXPOSURE: A knowledge of the available toxicology information and of the physical and chemical properties of the material suggests that overexposure is unlikely to aggravate existing medical conditions.

EYES: Flush with water.

NOTES TO PHYSICIAN: Treatment of overexposure should be directed at the control of symptoms and the clinical condition.

VI. REACTIVITY DATA

This material is known to be stable and does not react violently with any of the following: Air, Water, Heat, Strong Oxidizers.

HAZARDOUS COMBUSTION OR DECOMPOSITION PRODUCTS: Burning under certain conditions can produce aldehydes, ketones, carbon dioxide and / or carbon monoxide.

HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur.

CONDITIONS TO AVOID: None

VII. SPILL OR LEAK PROCEDURES

STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Small spills should be flushed with large quantities of water. Larger spills should be collected for disposal.

WASTE DISPOSAL METHOD: Dispense as permitted under appropriate Federal and State regulations.

VIII. SPECIAL PROTECTION INFORMATION

RESPIRATORY PROTECTION (specify type): None required under normal conditions of use.* For repeated professional usage, see V (inhalation)

VENTILATION: General (mechanical) room ventilation

PROTECTIVE GLOVES: Rubber or polyvinyl chloride coated.

EYE PROTECTION: Protect eyes from liquid with safety glasses

IX. SPECIAL PRECAUTIONS

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Normal precautions common to good manufacturing practice should be followed in handling and storage. Avoid repeated contact with skin and clothing. This product is intended for professional use only and should be kept out of the reach of children.

X. REGULATORY INFORMATION

The criteria for listing components in the composition section is as follows:

Carcinogens are listed when present at 0.1% or greater; components which are otherwise hazardous according to OSHA are listed when present at 1.0% or greater; non-hazardous components are listed at 3.0% or greater.

Product and/or Component(s) Carcinogenic According to:

OSHA

IARC

NTP

OTHER

NONE

PRODUCT IS NON-HAZARDOUS ACCORDING TO OSHA (1910.1200)

Federal Regulations:

SARA Title III:

Section 302/304 Extremely Hazardous Substances

Seq. Chemical Name

CAS Number

Range in %

None

Section 311 Hazardous Categorization:

Acute

Chronic

Fire

Pressure

Reactive

N/A

Section 313 Toxic Chemical

Chemical Name

CAS Number

Concentration

None

CERCLA 102 (a) / DOT Hazardous Substances: (+ indicates DOT Hazardous Substance)

Seq. Chemical Name

CAS Number

Range in %

None

CERCLA / DOT Hazardous Substances (Sequence Numbers and RQ's):

Seq.

None

TSCA Inventory Status: This product is listed on the Toxic Substance Control Act (TSCA) Chemical Substance inventory.

State Regulations:

California Proposition 65: The following detectable components of this product are substances, or belong to classes or substances, known to the State of California to cause cancer and/or reproductive toxicity.

Chemical Name

CAS Number

None

States Right-to-know Regulations:

Chemical

State Right to know

CAS # 57-55-6, 112-27-6

PA, RI

State list: CT (Connecticut) FL (Florida) IL (Illinois) MI (Michigan) LA (Louisiana) MA (Massachusetts) NJ (New Jersey) PA (Pennsylvania) RI (Rhode Island)

International Regulations: WHMIS Classification: Not Regulated

Canada Inventory Status: All components are listed on the Canadian Domestic Substance List (DSL).

EINECS Inventory Status: All components are listed on the European Inventory of Existing Chemical Substances (EINECS).

Australia Inventory Status: All components are listed on the Australian Inventory of Chemical Substances (ACIS).

Japan Inventory Status: All components are listed on the Japanese MITI inventory.

NOTE:

The opinions expressed herein are those of qualified experts within the field of Toxicology, Chemistry, and Information Specialists. These include results of independent scientific studies and Toxicology reports. We believe that the information contained herein is current as of the date of the Material Safety Sheet. Since the use of this information and of these opinions and the conditions of the use of the product are not within the control of High End Systems, it is the user's obligation to determine the conditions of safe use of the product.

Proprietary Notice